EVOLUMIX 1-10P
- Overall width (in m)260 cm
- Volume10 m³
- Number of blades per auger8
- Number of screws1
- Width250 cm
- Height270 cm
EVOLUMIX 1-12P
- Overall width (in m)2,6 m
- Volume12 m³
- Number of blades per auger9
- Number of screws1
- Height303 cm
EVOLUMIX 1-14P
- Overall width (in m)260 cm
- Volume14 m³
- Number of blades per auger11
- Number of screws1
- Height327 cm
- Option(s)PGL + TP + KATP
EVOLUMIX 1-17P
- Overall width (in m)260 cm
- Volume17 m³
- Number of blades per auger13
- Number of screws1
- Height370
The advantages of the mixer 1 vis Evolumix
In pursuit of an optimum mix and the reduction of motive energy, our Hardox steel screws have been the subject of detailed analysis with regard to their design and available features. By a comprehensive design analysis of the shape of the tank and its screw, the Evolumix range delivers a mixing performance and an operating speed of exceptional quality, in a design which is also conducive to economies.
Oil bath gearbox
Gearbox completely immersed in an oil bath with reservoir and easily accessible control gauge avoiding any regular maintenance at the lubrication level.
The fixing of the reducer by double plate to the tank avoids any possible deformation.
Sheet metal overflow protection ring
To prevent the material from overflowing, all EVOLUMIX 1 screw tanks have an anti overflow ring welded to the tank. This type of ring prevents the material from sticking to the tank like in traditional rings and offers a superior rigidity to the upper part of the tank.
Height adjustable drawbar
In order to keep your mixer at the same level whatever the model of tractor, all our EVOLUMIX mixers have a drawbar adjustable in height by steps of 50 mm.
C-profile frame
The EVOLUMIX chassis has been the subject of advanced research to obtain the best attributes in terms of strength. Thanks to a C-profile design and the choice of high-strength steel, the chassis offers the perfect compromise between strength and bending.
The C-profile frame offers greater ventilation than a closed frame and therefore allows the absence of permanent humidity zones. All our frames are fully protected by a high quality paint on the whole surface.
Steel tank of 8 and 20 mm thickness
The robustness and longevity of our machines has always been part of our brand's DNA. The Evolumix tanks are no exception to this rule and are designed with 8mm thick S355 steel walls and a 20mm thick tank bottom. These thicknesses allow your mixer to work intensively for many years.
4 manual counter-knives
All our EVOLUMIX 2 screws are equipped with 4 manual counter knives as standard. These prevent the material from turning around the screw. Acting as a brake, the counter-knives hold the material which is then cut when the screw knife passes through.
Our counter knives have 4 levels of depth adjustment allowing the material to be cut more or less.
4 load cells with programmable weighing
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Praesent ut mi sed purus dignissim iaculis. Duis vulputate a diam eget viverra. Aliquam nulla libero, suscipit.
Bumper with recessed lights
To protect your EVOLUMIX against possible collisions, our mixers are equipped as standard with a painted steel bumper with recessed lights.
Axle #100 with new wheels and tires
In order to support the heavy loads and to offer the greatest safety for the user, all EVOLUMIX are equipped with a large section axle and new tires (not retreaded).
Standard equipment
- Tank of 8 mm and 20 mm gauge s 355 steel
- Plated overflow prevention ring
- Reinforced tank base
- Independent C-section frame
- 2 manual counter-blades
- PG 1602 worm gear reducer (torque of 15,700 Nm)
- PG 2102 worm gear reducer (torque of 21,000 Nm)
- 2-speed 80 HP main gearbox with remote cable control. Screw speeds of 17 and 34 r.p.m.
- 2-speed 150 HP main gearbox with manual control. Screw speeds of 17 and 34 r.p.m.
- Front or rear conveyor with stainless steel base, chains and slats, for left-side and right-side unloading.
- 4 weight indicators with a diameter of 54 with programmable weighing (15 rations 15 ingredients)
- Direct connection of hydraulic functions to tractor (2 x dual effect)
- Inspection ladder.
- Height-adjustable drawbar with 50 diameter bolted ring
- Manual jack
- Frein manuel et hydraulique
- Axle # 80 with wheels of 445 / 45 19.5 new tyres
- Axle # 100 with wheels of 445 / 45 19,5 new tyres
- Bumper with recessed lights
- Wide angle gimbal
Features
